All articles
How-To 14 min read

Business Call Forwarding: Every Type, the Codes, and the Settings That Stop Lost Calls

A dark desk phone on a reflective desk at night, a cyan light trail splitting from it into three glowing paths, one ending above a smartphone

Short answer: Business call forwarding sends calls from your business number to another phone, either every call (unconditional) or only when the line is busy, unanswered or offline (conditional). On a landline you switch it on with *72 and off with *73; on a cloud phone system it is a rule you set once. Set the ring time short, or personal voicemail will swallow the call.

Call forwarding is the oldest trick in the business phone book, and it still solves the most common problem a small business has: the phone rings in one place and the person who should answer it is somewhere else. The owner is on a job site, the office is closed, the receptionist is at lunch, or the business is in the middle of switching providers.

It also fails in quiet, expensive ways. A forward that dumps callers into your personal cell voicemail, a holiday forward nobody turned off, a loop between two numbers that rings forever: none of these show up on a dashboard. The caller just gives up and calls the next business on the list. This guide covers the types of forwarding, the actual codes, what it costs, and the settings that keep it from losing calls.

Scope note: this page is about sending calls from your business number to another number. Routing calls between phones inside the office (ring groups, cascade timing, time-of-day schedules) is covered in our small-office call routing guide, and the whole missed-call problem, from routing to overflow, is mapped in the guide to never missing a call.

  • ▸Unconditional forwarding sends every call away immediately; conditional forwarding fires only on busy, no answer or unreachable. Most businesses want conditional.
  • ▸The codes are standard but not universal: *72 / *73 on most US landlines, **21* / ##21# on most mobile phones. Your carrier has the final word.
  • ▸The biggest failure is voicemail: if the phone you forward to answers with its own voicemail, the business call ends there.
  • ▸Carrier forwarding is a switch; cloud forwarding is a rule. Rules can follow a schedule, ring several phones and show your business number when you call back.

What is call forwarding?

Call forwarding is a phone feature that redirects an incoming call from the number the caller dialed to a different number, before anyone answers. It has been a standard telephone feature for decades: the North American industry's list of vertical service codes, maintained by NANPA, reserves *72 for call forwarding activation and *73 for deactivation, with separate codes for forwarding only when the line is busy or unanswered.

It is easy to confuse with call transfer, and the difference matters when you are choosing settings. Forwarding happens before the call is answered, automatically, based on a rule. A transfer happens after someone has answered and decides to pass the caller to another person. Forwarding is how a call finds you; transfer is how you hand it on.

For a business, forwarding is usually doing one of four jobs: reaching the owner's cell when the office phone goes unanswered, sending after-hours calls to an answering service or on-call person, keeping a number alive during a move or provider switch, or pointing a second number (a toll-free or tracking number) at the main line.

The types of call forwarding, and which one a business needs

The mobile phone standards body, 3GPP, defines four forwarding conditions, and landline and cloud systems offer the same ideas under slightly different names. Pick the condition first; the codes follow from it.

TypeWhen it firesBest business useWatch out for
Unconditional (forward all)Every call, immediatelyOffice closed for the day, moving locations, number in transitionThe original phone never rings, so nobody in the office gets a chance to answer
No answerAfter a set number of seconds unansweredOffice phone first, then the owner's or manager's cellRing time longer than the cell's voicemail pickup means voicemail wins
BusyThe line is already on a callA one-line business that cannot afford a busy signalOn a cloud system with call waiting, a busy state may never occur
UnreachablePhone is off, out of coverage or the line is downBackup path when an internet or power outage takes the office offlineHas to be configured on the provider side, not on the dead device
Simultaneous ring / find meRings several numbers at once or in orderOwner-operators and small teams who answer from anywhereNeeds a business phone system; basic carrier forwarding sends to one number

For most small offices the right default is no-answer forwarding with a short timer, plus unreachable forwarding as a disaster plan. Unconditional forwarding belongs on a schedule, not a switch someone has to remember to flip back.

How do you forward calls to another number?

The method depends on what kind of line the number lives on. Find yours below, and test from a phone that is not on your account when you finish.

On a landline or basic phone line: star codes

The codes on NANPA's vertical service code list are the ones most US landline carriers use. Whether your line supports each one, and whether it costs extra, is up to your carrier.

  • ▸*72 turns on forwarding of all calls; *73 turns it off.
  • ▸*90 / *91 turn customer-programmable forwarding on and off when the line is busy.
  • ▸*92 / *93 turn customer-programmable forwarding on and off when nobody answers.
  • ▸*68 / *88 turn combined busy and no-answer forwarding on and off on lines that offer it.
  1. 1.Pick up the business line and listen for dial tone.
  2. 2.Dial *72 (or the busy or no-answer code) and wait for a second dial tone or stutter tone.
  3. 3.Dial the full 10-digit number you want calls sent to.
  4. 4.Wait for the confirmation. On many lines, if the other phone answers, forwarding is set; if it does not, repeat the code within a couple of minutes.
  5. 5.Call the business number from a different phone and confirm it rings where you expect.

On a mobile phone: GSM codes or the settings menu

Most US mobile carriers follow the international codes defined in 3GPP TS 22.030, the standard for the codes you type into a phone's dialer. Its supplementary service codes are 21 for unconditional forwarding, 67 for busy, 61 for no reply and 62 for not reachable, with 002 covering all forwarding and 004 all conditional forwarding. The same standard lets the no-reply timer be set between 5 and 30 seconds, which is the setting that decides whether a call reaches you or your voicemail.

  • ▸**21*[number]# forwards all calls; ##21# cancels it; *#21# checks the status.
  • ▸**61*[number]# forwards on no answer, **67*[number]# on busy, **62*[number]# when unreachable.
  • ▸##002# clears every forwarding rule on the phone, the fastest fix when calls are going somewhere mysterious.
  • ▸Carriers vary. Some US carriers use *72-style codes on mobile too, and most phones offer forwarding under Settings, Phone or Calls. Your carrier's support page is the authority for your line.

On a cloud phone system: a rule, not a code

On a hosted business phone system you rarely dial a code at all. Forwarding is a setting per user, per number or per schedule in the admin portal or mobile app: forward to this number after 15 seconds, only outside business hours, and show the business number as caller ID. Because the rule lives with the provider rather than on a desk phone, it keeps working when the office loses power or internet. On a cloud voice line the office number can also ring the mobile app directly, which often removes the need to forward at all.

Can you forward business calls to your cell phone without giving out your number?

Yes, and that is the most common reason small businesses set up forwarding in the first place. Callers dial the business number, the call rings your cell, and your personal number is never published. The weak spot is the other direction: when you call a customer back from your cell, they see your personal number, and now it is in their contacts forever.

There are three ways to handle that, from simplest to best:

  1. 1.Carrier forwarding only. Inbound calls arrive on your cell; you return calls from the office line or accept that your number leaks. Fine for a few calls a week.
  2. 2.A forwarding number from a virtual-number service. Inbound works the same way, and some services offer an app for outbound calls from the business number. Check who owns the number before you print it anywhere; our explainer on what a VoIP number is covers why that matters.
  3. 3.A business phone app. The business number rings the app on your cell, and calls and texts you make from the app show the business number. Nothing is forwarded in the old sense, so there is no voicemail trap and no second phone bill.

Whichever route you pick, label the call. Many business systems can announce the call or show a prefix before you answer, so you know to pick up with the company name rather than a casual hello.

The voicemail trap, and four other ways forwarding loses calls

Forwarding failures are silent. The business never sees the call that went wrong; the customer just stops trying. These are the five that cause most of the damage:

  • ▸Personal voicemail answers first. You forward on no answer to your cell, your cell rings for 25 seconds, and your personal greeting picks up. The business call is now a message in a mailbox nobody checks for work. Fix it by keeping the forwarded ring shorter than your cell's voicemail pickup, or use a system that asks you to press a key to accept, so an unaccepted call comes back to the business path.
  • ▸Ring-time stacking. The office rings for 20 seconds, then the forward rings the cell for another 25. Callers rarely wait that long. Keep the total under about 30 seconds before the call reaches something that resolves it.
  • ▸Forwards nobody turned off. A Friday *72 to the owner's cell is still active the next Wednesday. Put forwarding on a schedule wherever the system allows it, and run a monthly test call.
  • ▸Loops. Number A forwards to B, B forwards back to A. Some networks catch it, others ring until the caller gives up. Map every forward on one page before you change any of them.
  • ▸Location assumptions. Forwarding a call to a remote phone does not move your 911 location, and federal rules for business phone systems under Kari's Law and RAY BAUM'S Act require direct 911 dialing and a dispatchable location for 911 calls, as the FCC's multi-line telephone system 911 page explains. If staff answer from home, make sure each user's emergency address on the system is current.

Does call forwarding cost money?

Sometimes twice. When a carrier forwards a call, the original call still comes in on your line and a second leg goes out to the forwarding number. Who pays for that second leg depends on the service.

  • ▸Traditional landlines: forwarding is often an add-on feature, and the forwarded leg can be billed like any outgoing call. On an old copper line, a month of forwarding to a cell can show up as usage you did not expect. Read the feature list on your bill.
  • ▸Mobile plans: on most current plans the forwarded leg is just plan minutes, but prepaid and limited-minute plans can count every forwarded call twice.
  • ▸Cloud business phone systems: forwarding rules, simultaneous ring and schedules are normally included in the per-user price. (Talk Is Cheap includes the auto attendant and ring groups on every plan, starting at $14.99 per user per month on annual billing, with taxes and fees itemized rather than hidden; the details are on the pricing page.)

If you are paying a landline bill mostly so the number can forward somewhere else, that is usually the signal to move the number to a cloud system and drop the line. Our guide to <a href="/blog/business-landline-phone-service">business landline phone service in 2026</a> covers when keeping one still makes sense.

Carrier forwarding vs. cloud forwarding rules

Carrier forwarding (star codes)Cloud phone system rules
SetupDial a code from the phoneSettings in an admin portal or app
DestinationsOne number at a timeSeveral numbers, at once or in order, plus apps
SchedulesNone; on until someone turns it offBusiness hours, lunch, holidays, automatic
Caller ID when you call backYour cell numberThe business number, from the app
Voicemail trapCommon; personal voicemail answersAvoidable with call confirmation and short timers
Works in an office outageOnly if set on the carrier side beforehandYes; the rule lives with the provider
CostOften an add-on plus forwarded-leg usageUsually included in the per-user price

Carrier forwarding is fine as a stopgap. As the permanent way a business number reaches people, it is a switch with no memory, and that is where most of the failures above come from.

Forwarding setups to copy

1. The owner-operator:
Business number → owner's mobile app, 15 seconds → office manager's cell, 15 seconds → missed-call text-back with a booking link.
No personal voicemail anywhere in the path. The text-back turns the miss into a conversation; our guide to missed-call text-back has the message templates.

2. The office that closes at 5:
Business hours: front desk ring group, then overflow. After hours, on a schedule: forward to the answering service or on-call number.
The forward turns itself on at closing and off at opening, so nobody has to remember. Compare the after-hours options and their costs in our after-hours answering comparison.

3. The number in transition:
Old line → unconditional forward to the new system's temporary number until the port completes.
This keeps callers reaching you while the number moves. Remove the forward the day the port finishes, and follow the order of operations in our no-downtime porting guide.

Forwarding is one link in the chain that decides whether a call gets answered; the rest of that chain, from ring groups to overflow, is in the guide to never missing a call, and the queue side is in call queues and overflow. If the last hop in your chain should answer instead of ring, our sister company Talos Automation shows how an AI voice agent picks up the calls that would otherwise be missed, and Houston-area offices replacing an aging system can read TMG's guide to choosing an AI-ready phone system.

Frequently asked questions

What is the code to forward calls?
On most US landlines and many cable or VoIP home-style lines, dial *72 followed by the 10-digit number you want calls sent to, and *73 to turn it off. Those codes come from the industry's vertical service code list that NANPA publishes. On most mobile phones the standard code is **21* plus the number and #, cancelled with ##21#. A cloud phone system does it in a settings screen or app instead.

How do I turn off call forwarding?
On a landline, dial *73 and wait for the confirmation tone. On a mobile phone, dial ##21# to cancel unconditional forwarding or ##002# to clear every forwarding rule at once, or switch it off in the phone's call settings. On a cloud phone system, disable the rule in the admin portal or app. Then call the number from another phone to confirm it rings where you expect.

What is the difference between conditional and unconditional call forwarding?
Unconditional forwarding sends every call to the other number immediately, so the original phone never rings. Conditional forwarding only fires when something specific happens: the line is busy, nobody answers within a set time, or the phone is off or out of coverage. Businesses usually want conditional forwarding, because the office still gets the first chance to answer.

Does the caller know their call was forwarded?
Usually not. The caller hears ringing and then whoever answers; there is no announcement unless you set one up. Most systems pass the original caller ID to the phone that rings, so you see who is calling. Better business systems can also play a short whisper or ask you to press a key before connecting, so you know it is a business call before you say hello.

Does call forwarding cost money?
It depends on where the forwarding happens. On many traditional landline plans, forwarding is a paid feature and the forwarded leg of the call can be billed as an outgoing call. On a mobile plan, the forwarded leg may count against plan minutes. On a cloud business phone system, forwarding rules are normally part of the per-user price. Check your own plan's feature list before you rely on it.

Can I forward calls to more than one number?
Not with basic carrier forwarding, which sends calls to one number at a time. To ring several phones, you need simultaneous ring (several numbers at once, first answer wins) or a sequential find-me/follow-me list, which are features of a business phone system. Our small-office call routing guide covers how to set both up.

Ready to stop overpaying for dial tone?

Get the whole platform — voice, text, video, AI — from $14.99 per user. Set up today, port your number free, cancel whenever. Talk is cheap; switching is even cheaper.